Contact Us

Crysalli Main Office

Address: 1739 Sabre Street Hayward, CA 94545

Phone:  (510) 732-0100

CP2000-CT2-iN2-2P

ProFusion Countertop System

N₂ Beverages on Tap

• Nitrogenated and Still Beverage on Tap.
• Flash chills ambient temp keged beverages.
• The system utilizes one keg of cold brew coffee, tea or your craft beverage of choice to dispense two different style beverages.
• Simple set-up: one keg connection and one gas connection.
• Integrated ProFusion injector nitrogenates the beverage at the time of dispense.
• Two integrated secondary regulators feed both the keg and injector pressures.
• Built in 50 mesh stainless steel strainer, washable and reusable.
• Optional custom tap handles available.

Specifications

• 30, 12 oz cups per hour @<40F
• Self-contained refrigeration system
• Compressor: 1/9 H.P.
• Refrigerant: R134a CFC-free
• Ambient Operating air temperature: 40F-100F
• Electrical: 120VAC/60Hz/1 Phase
• 2.8 AMPS
• Minimum circuit breaker size: 15 amps
• Water bath: 2.5 gallons
• Ice bank: 6 lbs
• Weight: 75
• Cup clearance: 8.5”
• 12”W x 26”D x 21.5”H*
• Air intake at rear with air filter
• Allow 4 inch rear and side clearance for airflow
• 6 ft overflow drain hose
• 9 ft electrical cord NEMA 5-15
• 4.25 inch legs
• * Actual height varies depending on tap handle style

pdf Spec Sheet (1.43 MB)

pdf ProFusion Brochure (3.30 MB)

archive CP2000 CT2 iN2 2P CAD Files (70 KB)

default QF Crysalli CP2000 CT2 iN2 2P REVIT File (744 KB)

CR-1-iN2

ProFusion Countertop System

N₂ Beverages on Tap

• Nitrogenated and Still Beverage on Tap.
• Flash chills ambient temp keged beverages.
• The system utilizes one keg of cold brew coffee, tea or your craft beverage of choice to dispense two different style beverages.
• Simple set-up: one keg connection and one gas connection.
• Integrated ProFusion injector nitrogenates the beverage at the time of dispense
• Two on-board regulators feed both the keg and injector pressures.
• Built in stainless steel particulate filter, 50 micron, washable and reusable.
• Optional custom tap handles available.

Specifications

• 50, 12oz cups per hour @<40⁰F
• Self-contained refrigeration system
• Compressor: 1/5 H.P.
• Refrigerant: R134a CFC-free
• Operating temperature range: 40⁰F-100⁰F
• Electrical: 115VAC/60Hz/1 Phase
• 3.4 AMPS
• Minimum circuit breaker size: 15 amps
• BTU: 2,200 per hour average
• Water bath: 5 gallons
• Ice bank: 10 lbs
• Weight: 75
• Cup clearance: 8.5”
• 12.3754”W x 27.5”D x 25”H
• *Actual height varies depending on tap handle style

  pdf Spec Sheet (1008 KB)

  pdf ProFusion Brochure (3.30 MB)

archive CR 1 iN2 2P CAD Files (78 KB)

default QF Crysalli CR 1 iN2 2P REVIT File (948 KB)

CR-24FCP

Water Filter System

CR-804-001

Low Volume Water Boost System

CR-804-023

Water Boost System

CR-804-026

Water Boost System

CR-PC160-14FCV

Primary high pressure CO2 regulator

For CO2 cylinder use

CR-PN60-516BSO

Primary N2 regulator

For nitrogen gas cylinder use

CR-S115-14FV

Secondary high pressure CO2 regulator

For bulk CO2 or split system use

CR-SDL-1

Universal, lever activated, faucet assembly 

Sanitary dispense lever compatible with:

X0101-B-HEX-SC

Black speedy valve, self closing bent nozzle, hex adjuster.

Standard faucet on CR-1, CR-2 and other countertop Crysalli models and the CM-V2W tower.

CR-SDL-SSX1

Lever activated, faucet assembly 

Sanitary dispense lever with stainless steel faucet:

Rigid stainless steel lever, extends 1.75" below nozzle

Self closing, spring loaded

Downward pointing nozzle

Comes with optional stainless steel tap cap

Use on custom draft towers and as a retrofit kit for CBR towers

iN2-DD2P

ProFusion Beverage Dispensing System

N₂ and CO₂ Beverages on Tap

• Plug and play; factory assembled system.
• The ProFusion system uses one cold keg of cold brew coffee, tea or your craft beverage of choice and dispenses two different style beverages from a single keg.
• Nitrogenated or lightly carbonated, and Still Beverage on Tap.
• Simple set-up: one keg connection and one gas connection.
• ProFusion Injector equipped with two secondary regulators, feeding both the keg and injector.
• Built in stainless steel particulate filter, 50 micron, washable and reusable.
• Optional custom tap handles available.

Features

• Two tap, air cooled, column tower with stainless steel faucets
• 24" width
• 30.125" depth
• 49.25" height*
• ** Actual height varies depending on tap handle style
• Weight: 174 lbs
• iN2-2P Injector, two product device
• N₂ primary regulator
• Available with premix tank quick connect couplers or with D style keg coupler

DD24HC direct draw cooler specifications:

• Volts: 115VAC/60Hz/1 Phase
• 4 AMPS
• Certifications for DD24HC:

  pdf Spec Sheet (667 KB)

  pdf Quick Installation Guide (2.79 MB)

  pdf ProFusion Brochure (3.30 MB)

iN2-TK2P

ProFusion Beverage Dispensing Tapping Kit

N₂ and CO₂ beverages on tap

• The iN2-TK2P tapping kit is designed to convert your existing kegorator or back bar cooler into a ProFusion beverage dispensing system.
• The ProFusion system uses one cold keg of cold brew coffee, tea or your craft beverage of choice and dispenses two different style beverages from a single keg.
• Nitrogenated or lightly carbonated, and Still Beverage on Tap.
• Simple set-up configuration: one keg connection, two outlets. One gas connection feeds both the system and keg (each with their own pressure control).
• High visibility and easy accessible particulate filter.
• Compact, thin design that can easily fit in coolers and not take up excessive space.

Specifications

iN2-2P Specifications:

• 10.5" width
• 4.5" depth
• 12.75" height
• One gas inlet, dual gas control for keg and injector pressures
• One product keg inlet, two product outlets
• Built in stainless steel particulate filter, 50 micron, washable and reusable
• Must be located in a refrigerated space within five feet of dispensing tower
• Liquid and gas inlet/outlet ports are on one side of the iN2-2P injector

iN2-V2 two tap, column tower specifications:

• Two stainless steel faucets
• Insulated and air cooled
• 3/8" barrier hoses
• Supplied with fittings and hose kit

Tapping Kit specifications:

• N₂ primary regulator included
• Available with premix tank quick connect couplers or with D style keg couplers

  pdf Spec Sheet (864 KB)

  pdf Quick Installation Guide (2.79 MB)

  pdf ProFusion Brochure (3.30 MB)

Unlock Silky Smooth Cold Brew & Velvety Nitro with Crysalli

Master cold brew and nitro coffee with Crysalli tips on ratios, extraction, and pouring for a perfect chilled coffee experience.